Publicidad
Idiomas disponibles
Idiomas disponibles
Needed for Connection
screen will appear. If your
network uses WPA Personal
security, the WPA-Personal
Needed for Connection
screen will appear. If your
network uses PSK2 (Pre-Shared
Key 2) security, the PSK2
Needed for Connection
screen will appear.
WEP Key Needed for
Connection
Select the level of encryption
you want to use, 64-bit or
128-bit. Then, enter a
passphrase or WEP key.
Passphrase - Enter a
passphrase, so a WEP key is
automatically generated. The
passphrase is case-sensitive
and should not be longer than
31 alphanumeric characters.
WEP Key 1 - For 64-bit
encryption, enter exactly 10
hexadecimal characters. For
128-bit encryption, enter
exactly 26 hexadecimal
characters. Valid hexadecimal
characters are "0" to "9" and
"A" to "F".
Then, click Connect.
All of the devices on
IMPORTANT:
your network must use the same
security method in order to
communicate with each other.
WEP Key
Your passphrase is
NOTE:
compatible with Linksys wireless
products only. (Non-Linksys
wireless products will require a
WEP key.)
5
Publicidad
