Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER (FIG. 1-3)
Note: Exact positioning may vary depending on your machine.
Note: In some instances, it may be necessary to mount the top U-bolts [N] above the handlebar crossbar support. This will help the
assembled cab sit higher for added clearance.
PARTS NEEDED
L
K
N
O
1
M
L
O
Assemble parts L, M, N & O as shown on your snowthrower handlebar upright where
indicated. Face [L] forward on machine. Repeat on the other side.
Whenever possible, mount top U-bolt [N] above crossbar as shown.
3
K
Tighten securely.
M
1b
N
L
+
2
K
Slide the lower mounting posts [K] onto the installed mounting post clamps [L].
10
TOOLS NEEDED
1/2 in. Box
Wrench
OR
Adjustable
Wrench
OR
1/2 in. Socket
Wrench
L
Publicidad
