Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 5
INSTALL THE CAB FABRIC SHELL ONTO THE FRAME (FIG. 1-4)
Note: Fabric shell will be tight when properly assembled.
PARTS NEEDED
1
R
Slide the pocket in the fabric shell [R]
over the installed front hoop assembly.
3c
Continue attaching all the rip-and-
grip tabs to the frame, back hoop
and front hoop assemblies.
R
+
2
Attach rip-and-grip tabs in the proper
sequence. Fabric will be tight to
the frame and hoop assemblies.
4
R
C
Slide the elastic strap at the bottom
of the fabric shell [R] around and over
the end of the mounting bar ends [C].
3a
Secure the fabric shell to the frame
with the sewn-in rip-and-grip
tabs starting below the window.
See position 1 of Step 2.
9
TOOLS NEEDED
NONE
3b
Make sure to correctly attach the
rip-and-grip straps to the frame.
Publicidad
