Sony Cyber-shot DSC-H20 Manual De Instrucciones página 55

Camara fotografia digital
Ocultar thumbs Ver también para Cyber-shot DSC-H20:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The
remaining
charge
indicator
is incorrect.
• The battery
charge will quickly get used up and the actual remaining
battery charge vdll be
lower than the indicator
in the following
cases:
When you use the camera
in an extremely
hot or cold location.
When you use the flash and zoom frequently.
When you repeatedly
turn the power on and off.
When you set the screen brightness
higher using DISP (screen display)
settings.
• A discrepancy
arose between
the remaining
charge indicator
and the actual remaining
battery
charge.
Fully discharge
the battery
pack once, then charge it to correct
the indication.
• The battery
pack is discharged.
Insert the charged
battery
pack (page 12).
• The battery pack is dead. Replace
it with a new one.
Cannot
charge
the battery
pack
while
it is inside
the camera.
• You cannot charge the battery
pack using the AC Adaptor
(sold separately).
Use the battery
charger (supplied)
to charge the battery.
The CHARGE
lamp flashes
while
charging
the battery.
• Remove
and reinsert the battery
pack, making sure it is installcd
correctly.
• The temperature
may be inappropriate
for charging.
Try charging
the battery
pack again
within the proper
charging
temperature
range (10°C to 30°C (50°F to 86°F)).
Cannot
record
images.
• Check the free capacity
of the internal
memory or "Memory
Stick Duo" media (pages 28, 32).
If it is full, do one of the following:
Delete unnecessary
images (page 36).
Change the "Memory
Stick Duo" media.
• You cannot record images while charging
the flash.
• When shooting
a still image, set the mode dial to other than [_
(Movie
Mode).
• Set the mode dial to _
(Movie
Mode) when shooting
movies.
• You can record movies
with an image size of [ 1280x720]
on "Memory
Stick PRO Duo"
media. When using recording
media other than "Memo U Stick PRO Duo" media, set the
movie image size to [VGA].
• The camera
is in Smile Shutter
demonstration
mode. Set [Demo Mode] to [Off].
White, black, red, purple or other streaks appear on the image, or the image
seems reddish.
• This phenomenon
is called smearing.
This is not a malfunction.
g-
55
GB

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido