Beko HNU51311SH Manual Del Usuario página 14

5 Setting up the device
• Cut the lower surface of the cabinet where the
hood will be installed in the dimensions speci-
fied in the technical drawing (Pic. 7).
Pic. 8
1. 3.5x9.5 screw
2. Ø 120 mm plastic flue
3. BodyValve pin socket
• Attach the plastic flue contained in the pack-
age to the body of the appliance using 2 screws
3.5x9.5. (Pic. 8) Do not rub it against the sur-
face. Pic. 8
Pic. 9
14 / EN
1. Air discharge pipe
2. Air exhaust flue of the hood
• Attach the air discharge pipe to the air exhaust
flue and fasten via clamp (Pic. 9).
1
A
2
3
1
2
Pic. 10
1. Kitchen cabinet bottom view
2. 4x3,9x32 hood installation screw
• Place the hood into the kitchen cabinet and at-
tach the hood to 4 installation holes drilled be-
fore (Pic. 10).
5.5 Storage
• If you do not intend to use the appliance for a
long time, please store it carefully.
• Please make sure that the appliance is un-
plugged, cooled down and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children
5.6 Handling and transportation
• During handling and transportation, carry the
appliance in its original packaging. The packag-
ing of the appliance protects it against physical
damages.
• Do not place heavy loads on the appliance or
the packaging. The appliance may be damaged.
• Dropping the appliance will render it non-opera-
tional or cause permanent damage.
CAUTION: As the bends and elbows
in the aluminum pipe will cause de-
crease in the air suction power, us-
ing these must be avoided as much
as possible.
Cooker Hood / User Manual