Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING AND ADJUSTMENTS
•
Loose all adjustable brackets.
•
Rock the cart back and forth to make sure that all brackets
are loose. Let the force of the springs push all rollers
towards the guides.
•
Lock all rollers by tightening the screws on the roller
brackets.
Fit the blade
•
Loosen the lock knob. Open the blade guard.
•
Hold down the button for locking the blade shaft.
•
Remove the nut. Remove the blade flange.
•
Check that the blade, blade flange and blade shaft are
undamaged. Clean the contact surfaces of the blade and
the blade flange.
•
Make sure that the blade will rotate in the direction
indicated by the arrow on the blade.
•
When mounting the blade pull out the spray nozzle and
move it from or towards the centre axle depending on the
size of the blade(10" or 8" blades).
•
When mounting the blade pull out the spray nozzle and
move it from or towards the centre axle depending on the
size of the blade(10" or 8" blades).
•
Fit the blade, blade flange and nut.
•
Close the blade guard. Tighten the locking knob.
– 11
English
Publicidad
