Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING AND ADJUSTMENTS
•
Screw the cutting guide onto the conveyor cart. The guide
can be folded outwards for angled cuts. Use the angle
markings on the cutting guide to set the correct angle.
•
Assemble the water recovery tray. Make sure that the
plastic hook grips the metal bar under the cart.
•
Connect the water hose (2) and the water pump (1) to the
connectors on the frame.
1
2
•
Place the water pump in the water tray. The pump
compartment should face towards the working position.
Slide in the water tray.
•
Fill the water tray with water up to the marked level.
•
Slide out the slurry collector tray and flip up the slurry
collector tray extension.
•
With a push, the slurry collector tray can be locked in its
inner position.
– 9
English
Publicidad
