EBERTH WP1-4TP370 Instrucciones De Uso página 36

Legend Figure 2
1. Pump engine
2. Pump end
3. Control electrode
4. Cable tie
5. Pressure line
6. Splint
7. Pressure gauge
8. Non-return valve
9. Shut-off valve
10. Control valve
1 1. ON/OFF Switch
12. Mains supply cable
A. dynamic water level line.
B. never less than 5 metres
C. never less than 1 metre
Connection of the control box
This work must only be carried out by a qualified electrician in order to avoid
hazards.
• The device is intended for connection to a 230 V ~ 50 Hz socket outlet with earthing
contact.
Make sure that the socket is sufficiently fused (min. 6 A).
• Connect all cables in , the terminals provided.See also figure 1, page 10.
• Insert the mains plug into the socket and the device is ready for use.
EN V. 1.0 13