Publicidad
Idiomas disponibles
Idiomas disponibles
5. Secure the legs of the frame
marked "A" in place with the
remaining two longer
thumb screws.
6. Fully tighten the shorter middle
screw and check to make sure all
screws are fully tightened.
7. Insert legs into leg frame by
depressing pushbutton, sliding
legs over the receptacle and
setting to desired height. Make
sure all the legs are set to the
same height. (Figure 4)
Leg Height Adjustment
1. Before use, adjust the height of
each leg to your specific needs,
making sure all legs are at the
same height. When desired
height is reached, lock legs into
place by aligning buttons into
proper holes. (Figure 5)
2. Ensure that the legs are locked
into place by pushing down and
pulling up on each leg.
Maintenance
Periodic visual inspection of this product is recommended to ensure
that all parts and hardware are secure, that components are in good
working order and not cracked, broken or fractured, and that there
are no obstructions or impediments to normal, safe operation. If any
part or mechanism appears to be unsafe or damaged, do not use
the product. If you experience problems, please contact Medline at
1-800-MEDLINE (633-5463) | 1-800-268-2848.
Cleaning
1. Clean with a non-abrasive cleaner or household cleaner with
warm water.
2. Rinse with warm water and wipe dry after cleaning.
3. DO NOT use abrasive powders, cleaners, cloths, or scouring pads.
4
Figure 4
Figure 5
G2-101KX1, G2-101KRX1 (PIC-00303 | V2 031224)
4
5
Publicidad
