Publicidad
Idiomas disponibles
Idiomas disponibles
3 : Mixing/blending/chopping/kneading
ACCESSORIES USED:
(b)
• Bowl assembly
.
(c)
• Spindle
.
(d)
• Multifunction blade
FITTING THE ACCESSORIES:
(b3)
• Place the bowl
onto the motor drive
• Slide the multifunction blade
(a1)
.
• Place the ingredients in the bowl.
(b2)
• Place the lid
and lock it on the bowl
• To remove the bowl-lid assembly: unlock the lid then unlock the bowl.
KNEADING/MIXING
• Turn the speed selector
You can knead up to:
- 600 g of heavy dough, such as white bread dough, shortcrust pastry in 30 sec.
- 500 g of special bread dough, such as rye bread, wholemeal bread, wholegrain bread, etc. in 30 sec.
You can mix up to:
- 600 g of light cake mixture such as biscuit dough, pound cake, sponge cake, etc. in approximately 1 min
30 sec.
You can also mix up to 0.5 litre of pancake or waffle batter in 1 min to 1 min 30 sec.
CHOPPING
• Turn the speed selector
You can chop up to 300 g of food such as:
- Raw or cooked meat (boned, trimmed and diced).
- Raw or cooked fish (skinned and filleted).
- Hard foods: cheese, dried fruit, some vegetables (carrots, celery, etc.).
- Soft foods: some vegetables (onions, spinach, etc.).
BLENDER
• Turn the speed selector
You can blend up to 0.5 litre of soup or stewed fruit in 20 sec.
ACCESSORIES USED:
(b)
• Bowl assembly
.
(c)
• Spindle
.
(f)
• Cartridge of choice
(g)
• Cartridge support
.
FITTING THE ACCESSORIES:
(b3)
• Place the bowl
on the motor drive
• Insert the selected cartridge
(c)
axle
as far as it will go through the cartridge
position it on the motor drive
(b2)
• Fit the lid
and lock it on the bowl
• To remove the bowl-lid assembly: unlock the lid and then unlock the bowl.
USAGE AND TIPS:
• Introduce the food through the lid feeder tube and guide it through using the pusher
• Turn the speed selector
You can prepare the following with the cartridges (depending on model):
(C)
- Coarse grating
/ fine grating
(H)
- Thick slices
/ thin slices
(E)
- French fries
: chips, etc.
- Potato fritters/Parmesan
.
(a)
and lock it in place.
(d)
onto the spindle
(b3)
.
(a3)
to position 2 to start it up.
(a3)
to position 2 to start, or for better control of chopping, use the pulse position.
(a3)
to position 2 to start.
(depending on model).
(a)
and lock it.
(f)
into the cartridge support
(a1)
.
(b3)
.
(a3)
to position 1 for slicing or position 2 for grating.
(A)
: celeriac, potatoes, carrots, cheese, etc.
(D)
: potatoes, onions, cucumber, beetroot, apples, carrots, cabbage, etc.
(G)
: for grating parmesan, coconut, etc.
(c)
, and position the entire assembly on the motor drive
4 : Grating/slicing
(g)
, introduce the spindle
(f)
, and lock the assembly, then
13
Check that the
metal axle of the
spindle (c) is
inserted in the
centre of the lid
with measuring
tube (b2)
(b1)
.
EN
Publicidad
