EINHELL KSE 2000 Instrucciones De Manejo página 18

CONTENT
1. Introduction to the Operating Instructions
2. Illustration and explanation of pictograms
3. Technical Data
4. General safety instructions
5. General safety information for power tools
1) Safety at the workplace
2) Electrical safety
3) Personal safety
4) Use and handling of the power tool
5) Service
6) Emissions
7) Safety instructions for chain saws:
8) Causes of kickbacks and how to avoid them:
9) Important instructions for your personal safety
a) General safety instructions
b) Instructions on using the chain saw safely
c) Warning to the danger of recoil ("kickback")
d) Instructions on safe working techniques
6. Starting up
1) Filling the oil tank
2) Assembling the blade and chain
3) Connecting the chainsaw
4) Switching on
7. Safety devices on your chain brake
1. Chain brake
2. Rundown brake
3. Safety starting lock
4. Chain catch bolt
8. Instructions on working properly with the chain saw
a) Felling a Tree
b) Notching Undercut
c) Felling Back Cut
d) Limbing a Tree
e) Bucking a Log
f) Spiked bumper
9. Maintenance and Servicing
10. In the case of technical problems
11. Repair Service
12. Waste disposal and environmental protection
13. Spare parts
14. Warranty
15. EC Declaration of Conformity
GB | Operating Instruction
GB-1
Translation of the original Operating Instructions
Page
GB-2
GB-2
GB-2
GB-3
GB-3
GB-6
GB-7
GB-7
GB-8
GB-8
GB-9
GB-9
GB-9
GB-9
GB-9