FROST WASH OPERATION
Frost Wash (Manual mode)
When the unit is off, press
Precautions for Use
Do not open windows or doors during frost wash operation. Water will condense on the air deflector and
drips down occasionally. This will wet your furniture.
Do not open or remove the front panel during Frost Wash operation. It may cause injury or malfunction.
Frost Wash operation does not wash away all dust and dirt.
Hissing, fizzy or squeaking noise may generate during Frost Wash operation.
If the air conditioner is continuously running, Frost Wash function is not effective.
During Frost Wash operation, if power is turned off and then power is restored, Frost Wash function will
not restart.
After turning on the power, please wait a moment if you want to start Frost Wash.
(For single model connection)
To cancel Frost Wash (Auto mode)
At the time of the effective setting, while pressing and holding
1
button, press
(Frost Wash/Clean) button on the same, Frost Wash
(Auto mode) is canceled. "
To start Frost Wash (Auto mode)
At the time of the disabled setting, while pressing and holding
2
button, press
(Frost Wash/Clean) button on the same, Frost Wash
(Auto mode) is set. "
If Frost Wash function is not in use for a long period, it may not be
possible to completely wash away the dust and dirt adhering to indoor heat
exchanger. It will cause odor, so please conduct frequently Frost Wash
function by using the remote controller.
Recommended time of Frost Wash operation will be informed by "
lamp flash for 15 seconds upon air conditioner operation stop.
The screen of the remote control
At Frost Wash (Auto) reserved, "
At Frost Wash (Auto) not reserved, "
(Frost Wash/Clean) button, manual Frost Wash will start.
How to start and cancel Frost Wash (Manual mode).
Press
(Frost Wash/Clean) button, "
Wash operation will start. "
1
After one hour, "
" disappears from the LCD. After about two hours, the
indoor unit will stop Frost Wash operation.
In order to protect the product, Frost Wash function cannot be carried out
again for about 60 minutes after the Frost Wash operation is completed.
2
Press the
(START/STOP) button, the operation will stop.
"
" lamp on the indoor unit turns off.
- 17 -
"disappears from the LCD.
" is displayed on the LCD.
" is displayed on the LCD.
" disappears from the LCD.
" is displayed on the LCD. Frost
" lamp on the indoor unit lights up.
(TIME)
(TIME)
"