Hitachi RAR-6NE1 Manual De Instrucciones página 25

WEEKLY TIMER OPERATION
Step 3: Copy and cancel the reservation schedule.
NOTE
If there is no reservation data, copying data from one day to another day cannot be done.
●
■ How to copy and paste.
1
Editing the reservation schedule is easy by copying data from one day to
another day.
2
1. Press (WEEKLY) button to select Mode A or Mode B.
2. Press (WEEKLY) button for about 3 seconds to start editing the
reservation schedule.
3 3. Press (DAY) button to select a day of the week to copy.
4. Press (COPY/PASTE) button. Then "PASTE" blinks on the
display.
* Press (CANCEL) button to cancel the COPY mode. Normal
setting mode is activated.
5. Press (DAY) button to select a day of the week to paste.
4
6. Press (COPY/PASTE) button one more time to paste.
blinks on the display.
7. To continue copying to other days, press
.
5
Then start from step 3.
8. After copy and paste completed, press
directing the remote controller towards the indoor unit for about 3
seconds. Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
Please ensure that the TIMER lamp lights up.
6
If TIMER lamp does not light up, Press
Reservation data will not change if
●
8
- 25 -
only
or or or
(SEND) button while
(SEND) button again.
(SEND) button is not pressed.