GE 21 Manual Del Propietario E Instalación página 22

Inserting the door panels.
Read these instructions completely and carefully.
Insert the Freezer Panel and Refrigerator Panel.
Carefully push the freezer panel in until it slides into the
slot behind the door handle. Push the filler panel (required
with some door panels) in behind the decorator panel.
Repeat for refrigerator panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot
behind the door handle. Push the filler panel (required
with some door panels) in behind the decorator panel.
Attach the Top Trim on the Freezer and Refrigerator Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using
two screws on each Top Trim piece, to the top
22
Top Trim Screws
Top Trim Screws
Cut-Out
Top
Freezer
Panel
Bottom
Freezer
Panel
Side Trim
If your model has a dispenser, this step only applies
to the refrigerator panel and top freezer panel.
of each door. Hand tighten only. Make sure that the top
of each panel fits snugly behind the lip of the Top Trim.
Cut-Out
Refrigerator
Panel
Side Trim