Emerio DH-122845.2 Manual De Instrucciones página 11

Wi-Fi CONNECTION GUIDE (This guide for the APP may not be up to date due to software version upgrade or
other reasons. This instruction is used as a guide only. Below mobile phone interface uses English version in
iOS as an example.):
1. Search "Smart Life" in App Store (for iOS) or Google play (for Android) to download the application.
2. Sign up or log in to your account on the APP. Tap the "+" at top right corner or button "Add Device" to add
your device. (Fig.1)
3. Find "Small Home Appliances" and tap the icon "Dehumidifier (Wi-Fi)". (Fig.2)
You will get the prompt that asks you to use 2.4 GHz Wi-Fi network and enter password. (Fig.3) Tap "Next"
to get Fig.4.
Note: When setting up Wi-Fi function you need to select an available 2.4 GHz network and connect the
appliance. Your mobile needs to be connected to the same network in order to set up Smart Life in the
phone. When this is done you can access the appliance from your phone on any network.
There are two ways to do the net pairing. Press and hold the Wi-Fi button on the control panel for approx.
10 seconds until the Wi-Fi indicator light blinks quickly (way 1). Continue to press and hold the Wi-Fi button
until the Wi-Fi indicator light blinks slowly (way 2).
It is recommended to use way 1; if failed please use way 2.
Way 1:
1) Press and hold the Wi-Fi button on the control panel for approx. 10 seconds until the Wi-Fi indicator
light blinks quickly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Quickly".
3) Wait until you get Fig.7 and then tap "Done".
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Way 2:
1) Press and hold the Wi-Fi button on the control panel for approx. 10 seconds until the Wi-Fi indicator
light blinks quickly. Continue to press and hold the Wi-Fi button until the Wi-Fi indicator light blinks
slowly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Slowly".
Continue to tap "Go to Connect" in Fig.6 to connect your mobile phone to the device's hotspot
"SmartLife-XXXX". After the hotspot has been connected, go back to the App.
3) Wait until you get Fig.7 and then tap "Done".
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Note: The appliance is compatible with Alexa and Google Assistant.
- 10 -