Toyotomi zibro RS-221 Instrucciones De Uso página 18

I
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank
acceptance fitting (Fig. P). Some drops may leak from the fuel acceptance
fitting; keep a cloth at hand. Store the fuel acceptance fitting and the
removable tank outside the heater.
3 Place the transportation cap into the position of the fuel acceptance fitting
(Fig. Q). Press it tight.
4 Always move the heater in an upright position.
J
SPECIFICATIONS
Ignition
Fuel
Capacity (kW)
) **
Suitable space (m 3
Fuel consumption (l/hr)
Fuel consumption (g/hr)
Burning time per tank (hr)
Capacity removable tank (litres) 4.0
** Specified values are indicative
4
10
from the heater and remove the fuel
electrical Dimensions (mm)
paraffin (including base plate) depth
2.20
35-80 Accessories:
0.229 Required batteries
183
17.5 Wick type
Weight (kg)
width 422
281
height 446
manual fuel pump
transportation cap
4x LR20, MIN 1300
1.5V, size D
F
7.5
P
Q
Transportation cap