Mitsubishi Electric Mr.SLIM PEAD-RP140JAQ Manual De Instrucciones página 12

8. Function Selection
[Function selection flowchart]
Setting language (English)
Item1
Change
Language
Function
selection
E
Mode
selection
Display
mode setting
12
Normal display
(Display when the air condition is not running)
Hold down the E button and press the D button for 2 seconds.
Remote controller function selection mode
Item2
G
English
G
Germany
E
Spanish
Russian
G
Italy
Chinese
French
Japanese
G
G
E
G
G
G
*
G
*
G
G
E
G
G
G
G
G
G
G
Hold down the E button and press the D button for 2 seconds.
Item3
D
Operation lock setting is not used.
OFF
(Initial setting value)
D
on1
Operation lock setting is except On/Off button.
D
on2 Operation lock setting is All buttons.
D
The automatic mode is displayed when the operation mode is
ON
selected. (Initial setting value)
D
D
The automatic mode is not displayed when the operation mode
OFF
is selected.
D
The temperature range limit is not active. (Initial setting value)
OFF
D
The temperature range can be changed on cooling/dry mode.
D
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
*) For this model, this function is not available.
D
The remote controller will be the main controller. (Initial setting value)
D
D
The remote controller will be the sub controller.
D
ON The clock function can be used. (Initial setting value)
D
D
The clock function can not be used.
OFF
D
Weekly timer can be used. (Initial setting value)
D
Auto off timer can be used.
D
Simple timer can be used.
Timer mode can not be used.
D
The set contact numbers are not displayed in case of error.
OFF
(Initial setting value)
D
D
The set contact numbers are displayed in case of error.
CALL-
D
The temperature unit °C is used. (Initial setting value)
°C
D
D
The temperature unit °F is used.
°F
D
Room air temperature is displayed. (Initial setting value)
ON
D
D
OFF
Room air temperature is not displayed.
D
One of "Automatic cooling" and "Automatic heating" is displayed
ON
under the automatic mode is running. (Initial setting value)
D
D
OFF
Only "Automatic" is displayed under the automatic mode.
E Press the operation mode button.
G Press the TIMER MENU button.
D Press the TIMER ON/OFF button.
Dot display
F
TEMP. ON/OFF
MENU ON/OFF FILTER
E
BACK MONITOR/SET DAY
CHECK TEST
PAR-21MAA CLOCK OPERATION CLEAR
G
D
C
I
A
B
H