Publicidad
Step 7
å
First, fill the exact two holes shown in the RIGHT UPRIGHT (L) 1/4 to 1/2 full with
GLUE (177M). Then, insert two WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown.
å
Now, fill the holes in the LEGS (H and T) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (H and T) to the RIGHT UPRIGHT (L). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the RIGHT UPRIGHT insert into the
LEGS. Wipe away the excess GLUE.
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
These surfaces
should be even.
www.sauder.com/service
H
L
S u r
f a c
H I D
e w
D E N
i t h o
u t
C A
M S
T
422984
1
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Edge without hole
15F
Edge without hole
Page 11
Publicidad
