Batavia Maxxspray BT-PSS001 Manual De Usuario página 11

and control of the tool in unexpected
situations.
Service
2.5
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
3. Additional safety warnings for
electric spray guns
To reduce the risks of fire or explosion, elec-
trical shock and the injury to persons, read
and understand all instructions included in
this manual Be familiar with the controls
and proper usage of the equipment.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
a. HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can explode or
ignite. Severe injury or property damage can
occur.
PREVENTION:
• Ensure adequate ventilation in the spray
zone and sufficient fresh air in the entire
room. Evaporation of flammable sol-
vents will cause an explosive
environment.
• Avoid all ignition sources such as static
electric sparks, open flames, pilot lights,
electrical appliances, and hot objects.
Connecting or disconnecting power
cords or working light switches can
make sparks.
• Do not smoke in spray area.
• Fire extinguisher must be present and in
good working order.
• Use only outdoors in a well-ventilated
area. Flammable vapours are often heav-
ier than air. The turbine contains arcing
parts that emit sparks and can ignite
vapours.
• Follow the material and solvent manu-
facturer's warnings and instructions.
• Do not use materials with a flash point
below 21 °C Flash point is the tempera-
ture that a fluid can produce enough
vapours to ignite (see coating supplier).
• Plastic can cause static sparks. Never
hang plastic to enclose the spray area.
• Do not use plastic drop cloths when
spraying flammable materials.
b. HAZARD: EXPLOSION HAZARD DUE
TO INCOMPATIBLE MATERIALS.
Will cause property damage or severe injury.
PREVENTION:
• Do not use materials containing bleach
or chlorine.
• Do not use halogenated hydrocarbon
solvents such as bleach, mildewcide,
methylene chloride and 1,1,1--trichlo-
roethane. They are not compatible with
aluminium.
• Contact your coating supplier about the
compatibility of material with aluminium.
c. HAZARD: HAZARDOUS VAPOURS
Paints, solvents, insecticides, and other
materials can be harmful if inhaled or come
in contact with the body. Vapours can cause
severe nausea, fainting, or poisoning.
PREVENTION:
• Use a respirator or mask if vapours can
be inhaled. Read all instructions supplied
with the mask to be sure it will provide
the necessary protection.
• Wear protective eye-wear.
• Wear protective clothing as required by
coating manufacturer.
d. HAZARD: GENERAL
Can cause severe injury or property
damage.
PREVENTION:
• Follow all appropriate local, state, and
national codes governing ventilation, fire
prevention, and operation.
• Use only manufacturer authorized parts.
User assumes all risks and liabilities
when using parts that do not meet the
minimum specifications and safety
devices of the manufacturer.
• Do not spray outdoors on windy days.
• Wear protective clothing to keep paint off
skin and hair.
• Never aim spray gun at any part of the
body.
• Never aim the spray gun at people or
animals.
English
9