Accessories - CONTINENTAL EDISON CECI603ZB Manual De Usuario

When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol "A" and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
sound. The symbol will disappear and the
timer will switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
3. Use the "+" and
"-" buttons to set the
desired finishing time.
4. The current time
will reappear on the
screen, the symbols
"A", and will
remain illuminated.
will flash.
2. Press "MODE" until
you see "dur" and
symbol on the screen.
The symbol "A" will
flash.
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time
will reappear on the
screen, the symbols
"A", and will
remain illuminated.
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbols "A" and
Turn both control knobs to the "0" position
and press any key to stop the sound. The
symbol will disappear and the timer will
switch back to manual function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the "-" button for
1-2 seconds until an audible signal sounds.
After this, each time the "-" button is
pressed, a different signal will sound. There
are three different types of signal sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.

4.4 Accessories

The Deep Tray
The deep tray is best used for cooking
EN - 20
5. Press "MODE" until
you see "end" and
symbol on the screen.
The time and the
symbols "A" and
flash.
6. Select the desired
finishing time using the
"+" and "-" keys.
7. Add the cooking
period to the current
time of day. You can
set a time of up to 23
hours and 59 minutes
after this.
8. The current time
will reappear on
the screen, and the
symbols "A", and
will remain illuminated.
will flash.
will