Publicidad
Idiomas disponibles
Idiomas disponibles
c) Only hold the chainsaw by the insulated grip-
ping surfaces, as the saw chain could hit hidden
power lines or its own mains cable. Contact be-
tween the saw chain and a live power line can also
electrify metal device parts and lead to an electric
shock.
d) Wear eye protection. Further protective equip-
ment for hearing, head, hands, legs and feet is
recommended. Suitable protective clothing reduc-
es the risk of injury from flying chips and accidental
contact with the saw chain.
e) Do not work with the chainsaw in a tree, on a
ladder, or from a roof or an unstable standing
surface. There is a serious risk of injury if operated
in such a manner.
f) Always make sure you have a firm footing and
only use the chainsaw when standing on firm,
safe and level ground. Slippery ground or unstable
standing surfaces can cause loss of balance or loss
of control of the chainsaw.
g) When cutting a branch that is under tension, ex-
pect it to spring back. If the tension in the wood fi-
bres is released, the tensioned branch can hit the
operator and/or wrest the chainsaw from control.
h) Be especially careful when cutting undergrowth
and young trees. The thin material can get caught
in the saw chain and hit you or throw you off bal-
ance.
i)
Carry the chainsaw by the front handle when
switched off, with the saw chain facing away
from your body. Always put the protective cover
on when transporting or storing the chainsaw.
Careful handling of the chainsaw reduces the likeli-
hood of accidental contact with the running saw
chain.
j)
Follow the instructions for lubrication, chain
tensioning and replacing the guide bar and
chain. An improperly tensioned or lubricated chain
can break or increase the risk of kick-back.
k) Only saw wood. Do not use the chainsaw for
work for which it is not intended. Example: Do
not use the electric chainsaw to saw metal, plas-
tic, brickwork or building materials other than
wood. Using the chainsaw for unintended work can
cause dangerous situations.
l)
This chainsaw is not suitable for felling trees.
Using the chainsaw for work other than that for
which it is intended may result in serious injury to
the user or other persons.
Causes and avoidance of kickback
Kickback can arise if the tip of the guide rail touches an
object or if the wood bends and the saw chain jams in
the cut.
Touching with the rail tip can sometimes lead to an un-
expected backward reaction, whereby the guide rail
whips up and in the direction of the user.
If the saw chain jams on the top edge of the guide rail,
the rail can jerk back in the direction of the user sud-
denly.
Each of these reactions can lead to you losing control
of the saw and possibly suffering a serious injury. Nev-
er rely solely on the safety equipment integrated in the
chainsaw. As the chainsaw user, you should implement
various measures to work without a risk of accidents
and injuries.
Kickback is the result of incorrect use or misuse of the
cordless chainsaw. It can be prevented by suitable pre-
cautionary measures, as described in the following:
a) Hold the saw firmly with both hands, with the
thumbs and fingers enclosing the chainsaw
handles. Bring your body and arms into a posi-
tion in which you can absorb the kickback forc-
es. If suitable measures are implemented, the user
will be able to withstand the kickback forces. Never
let go of the chainsaw.
b) Avoid an unusual body stance and never saw
above shoulder height. This will help to avoid un-
intentional contact with the rail tip, and enable im-
proved control of the chainsaw in unexpected situa-
tions.
c) Always use replacement guide rails and saw
chains prescribed by the manufacturer. Incorrect
replacement rails and saw chains may cause the
chain to break and/or lead to kick-back.
d) Adhere to the instructions of the manufacturer
when sharpening and maintaining the saw
chain. If the depth limiter is too low, this increases
the tendency towards kickback.
Additional safety instructions
• Carefully follow the maintenance, inspection and
service instructions in this operating manual. Dam-
aged protective devices and parts must be repaired
properly or replaced by our service centre unless
otherwise specified in the operating manual.
• We recommend that a person using the tool for the
first time should at least practice by cutting logs on
a sawhorse or stand.
• Always stand above the tree trunk when sawing on
slopes. In order to maintain full control at the mo-
ment of "cutting all the way through", reduce the
pressing force towards the end of the cut, without
loosening your firm grip of the handles of the prod-
uct. Ensure that the saw chain does not come into
contact with the ground. After completing the cut,
wait for the product to stop before removing the
product.
Always switch off the engine of the product and re-
move the battery before moving from tree to tree.
• Dirt, stones, loose bark, nails, staples and wire must
be removed from the tree.
• Do not use accessories that are not recom-
mended by the manufacturer. This can lead to
electric shock or fire.
www.scheppach.com
GB | 27
Publicidad
