ANSMANN WL14000AC Manual Del Usuario página 7

• Do not cover the product - risk
of fire.
• Never expose the product to
extreme conditions, such as
extreme heat/cold etc.
‫ ׉‬GENERAL INFORMATION
• Do not throw or drop
• The LED cover cannot be replaced. If the cover is dama-
ged, the product must be disposed of.
• The LED light source cannot be replaced. If the LED has
reached the end of its service life, the complete lamp
must be replaced.
• Do not open or modify the product! Repair work shall only
be carried out by the manufacturer or by a service tech-
nician appointed by the manufacturer or by a similarly
qualified person.
• Disconnect the device from the power supply only by
pulling on the plug or plug housing, never on the cable.
• Information for the light and mains adapter as well as
mains voltage on the socket must match with the type
plate.
• The lamp shall not be placed face-down or allowed to
topple face-down.
Handling notes:
• Always carry the product using the handle
• When placing it down, ensure that the lamp cannot
topple over.
First use | operation:
• Switch on the light by pressing the On/Off button
• Repeated pressing cycles through the functions
• Always switch the light off when not being used.
Holding device:
When using a holding device (magnets, stand, etc.),
ensure that the holding device is firmly/properly fastened
in place in order to avoid possible damage due to the
lamp falling.
LED energy label:
This product contains a light source of energy efficiency
class E.
1. Handle
2. Function button
3. Fold-out LED modules
4. Cable winding
5. Stand
6. Stand mount
7. Locking wheel
‫ ׉‬CARE AND MAINTENANCE
• Carry out cleaning tasks only when the mains plug has
been pulled out / when the power supply has been
Deutsch |
English
| Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk | Polski
disconnected.
• Clean only with a slightly damp cloth, then rub it dry.
• Do not use hard brushes or sharp objects for cleaning.
‫ ׉‬ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type.
Cardboard and cardboard to the waste paper, film to the
recycling collection.
Dispose of the unusable product in accordance with
legal provisions. The „waste bin" symbol indicates
that, in the EU, it is not permitted to dispose of electrical
equipment in household waste.
For disposal, pass the product on to a specialist disposal
point for old equipment, use the return and collection
systems in your area or contact the dealer from whom
you purchased the product.
‫ ׉‬LIABILITY DISCLAIMER
The information contained within these operating inst-
ructions can be changed without prior notification. We
accept no liability for direct, indirect, incidental or other
damage or consequential damage arising though impro-
per handling/use or through disregard of the information
contained within these operating instructions.
The product complies with the requirements from the
EU directives.
Subject to technical changes. We assume no liability for printing errors.