EVERCLEAN™ ANTI-MICROBIAL TOILET SEAT
MODELS 5284.016 Elongated
5282.011 Round Front
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
Side View of the toilet seat installation parts.
Hinge
Cover
Plastic
Bolt
Adjustment
Washer
Hinge
Gasket
3
When the seat is properly aligned with the
front edge of the bowl slip the bolt through
the washer and the bowl bolt holes.
5
Tighten the bolts using your screwdriver.
All product names listed herein are trademarks of AS America Inc. unless otherwise noted.
© AS America Inc. 2009
Installation
™
Instructions
1
Hinge
Attach the hinge gasket to bottom of the
hinge and postiion the seat and align
Plastic
hinges over holes on toilet bowl.
Wing Nut
6
The hinge cap covers are designed to snap
lock on to the hinge position the hinge
covers and push down on the cover.
4
With the plastic bolts installed, thread
the winged plastic nuts on to the bolts.
7
1
TOILET SEAT
2
The installation kit includes two sets
of stainless washers: 2 with center
holes and 2 with off set holes. The
off set washers hole can be set
forward or back allowing the seat to
be moved back from or to the
forward edge of the bowl rim.
TANK
To Move Seat
Forward
FRONT OF BOWL
Replacement Kit #255 Available:
PART NO.
DESCRIPTION
760087-0070A
Replacement Kit #255
To Move Seat
Back
7 6 0 1 0 3 - 1 0 0