Archer Australia A2758 Manual Del Usuario página 4

EN
Shear parts
1. Upper blade
2. Fixed blade
3. Gear
4. Trigger
5. Power switch
6. Lithium battery
7. Charging port
8. Battery removal button
9. Gear lubricant grease injection hole
10. Charger
11. Display monitor
USE AND MAINTENANCE
Start to Use
1. Open the package and put the battery to the electric shear.
2. Turn on power switch and power indicator will be green.
3. There is one buzzer "BEEP" once electric shear power on, and then pull the trigger twice to
activate to working performance.
4. Pull trigger for blades closed and release trigger for blades open.
5. Pull and hold trigger for blades closed as after work mode until 2 seconds of buzzer "BEEP".
6. Before start working, it is advised to testing few times of blades closed and open.
After Use
1. Pull and hold trigger for blades
closed as after work mode until 2
seconds of buzzer "BEEP".
2. Turn off the power and remove
the battery.
3. Clean and pack the shear.
4