Archer Australia A2758 Manual Del Usuario página 6

EN
Blade replacement
When the whole length of the moving blade no longer coincides well with the fixed force blade, or
the cutting is not clean after polishing the blade, it is recommended that you replace the blade. The
operation steps are as follows:
1. To ensure safety, please cut off the power and take out the battery before replacement.
2. Replace the blade step by step as shown below.
3. After replacement, clean, connect the battery, electrify and detect, close the blade.
* Fixed and moving blades can be replaced separately; There is no need to worry about the opening size of the
blade when replacing, and the normal opening size will be automatically restored after being electrified.
PRECAUTIONS FOR USE AND MAINTENANCE
Precaution for electric pruning shears
1. Do not cut branches beyond the working range of shear force, do not cut hard things such as
metal, Stone and other non-plant materials, and do not clamp tools with vises. If the scissors are
worn or damaged, please replace the scissors.
2. Keep the equipment clean. Clean the electric pruning shears, batteries and chargers with a clean
cloth (do not use any corrosive or solvent-based cleaners). Use soft drama or dry right to clean the
dust on the scissors heads.
3. Do not dip electric pruning shears, batteries, chargers, etc. in any liquid such as water.
4. Please use the equipment correctly according to the instructions. Do not use the electric pruning
shears, batteries and chargers when they are damaged.
6