Comunello RAYWIN Serie Manual De Instrucciones página 25

5. INSTALLATION
Top-hung outward opening window: Overall dimensions and fixing holes
5.1 Installation sequence
Check that the force required to open/close it (calculated according to the table under Point 5.2) is less than or equal
to that shown in the TECHNICAL DATA table.
Try manually the window opening, checking for and if necessary eliminating any sticking points that could cause
a malfunction.
Manually test the maximum opening of the window, checking that it is greater than the travel set by the actuator.
ONLY FOR SOLAR SHADING Check that the width of the upright, where the actuator is to be fitted, is equal to, or more
than, 55 mm. Otherwise, it is NOT POSSIBLE to fit the actuator.
CAUTION: If the apparatus is with bottom-hung windows, there is a danger of potential injury resulting from
the window accidentally falling.
It is OBLIGATORY to fit limiting arms (of the Series 1276 type), or an alternative safety system, of a suitable size
to prevent the window from accidentally falling down.
Solar shading: Overall dimensions and fixing holes
7