Maxon 209880-01G Instrucciones De Montaje página 14

NOTE: Holes for mounting brackets are marked and drilled only after liftgate is in correct
position on the pickup bed.
1. Position the LH and RH mounting brackets
(Kit items) in the pickup bed just forward
of corner posts (FIGS. 14-1 and 14-2).
2. Position liftgate in the rear opening of the
pickup bed (FIGS. 14-1 and 14-2).
• Liftgate centered on rear opening in
pickup bed
• Columns vertical
• Spare tire access hole aligned with
spare tire tube on truck
• Top of main frame fl ush with fl oor of
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
3. Bolt the main frame brackets on liftgate,
to the RH and LH mounting brackets as
shown in FIGS. 14-1 and 14-2. Hand-
tighten bolts and nuts.
LIFT CORPORATION Sht. 14 of 76 DSG#
INSTALLING LIFTGATE
M-24-01
RH MOUNTING
BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
3/8"-16 X 1" LG
HEX BOLT,
3/8" LOCK WASHER
3/8" HEX NUT
(3 PLACES)
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO LH
MOUNTING BRACKET
Rev. - Date: 05/07/24
3/8"-16 X 1" LG
HEX BOLT,
3/8" LOCK WASHER
3/8" HEX NUT
(3 PLACES)
MAIN FRAME
RH BRACKET
FIG. 14-1
LH MOUNTING
BRACKET
PRO POWER
PANEL
FIG. 14-2