Maxon 209880-01G Instrucciones De Montaje página 32

INSTALLING CAMERA AND SENSORS (IF EQUIPPED) - Continued
4. Adjust camera angle (FIG. 32-1) by
bending camera mounting bracket
until image on backup camera display
screen adheres to standard in
FMVSS 111.
5. Install each of the OEM sensors (if
equipped) into 4 brackets as shown
in FIGS. 32-2 & 32-2A.
6. Use plastic ties (Kit items) to secure
sensors to mounting brackets as
shown in FIG. 32-2A.
7. Connect OEM sensor harness on
the vehicle to all sensors.
LIFT CORPORATION Sht. 32 of 76 DSG#
OEM SENSOR
(4 PLACES)
SENSOR MOUNTING
(4 PLACES)
CAMERA MOUNTING
BRACKET AND OEM
CAMERA
+/- 40° TILT
ADJUSTING CAMERA ANGLE
OEM SENSOR
SENSOR MOUNTING
BRACKET
BRACKET
INSTALLING SENSORS (IF EQUIPPED)
M-24-01
Rev. - Date: 05/07/24
FIG. 32-1
FIG. 32-2A
FIG. 32-2
PLASTIC
TIE