Publicidad
Idiomas disponibles
Idiomas disponibles
6. USE INSTRUCTIONS
1. Take the unit out of the packaging and place it on a stable, horizontal
surface.
2. Fill the water tank so that the water level is always between the MIN and
MAX marks.
3. Plug in the power cord with dry hands and make sure it is securely connec-
ted. Press the power switch located on the back of the computer. A "BEEP"
will be heard and the power indicator will light up.
4. Press ON/OFF to turn on the unit. The computer will start to run at low
speed. If you press ON/OFF again, the equipment will enter standby mode. It is
convenient to turn off the COOL mode 15 min. before shutting down the equip-
ment to dry the cooling filters.
5. Press the COOL button to start evaporative cooling. If you don't press COOL,
the computer works as a fan.
6. Press the SPEED button: the wind speed will change from low to medium or
high.
7. Press the MODE button to switch between the different wind modes:
normal-nature-sleep.
Normal: the computer runs constantly at the selected speed.
Nature: the air speed varies imitating a natural current.
Sleep: the equipment works in Nature mode at the speed that we have selec-
ted and every half hour it reduces it to a lower speed: High nature-Mid natu-
re-Low nature.
8. Press TIMER to activate/deactivate the equipment shutdown timer between
1 and 12h.
10
Publicidad
