ASSEMBLY INSTRUCTIONS
1a. Attach door stoppers (OO) to top panel (A) and bottom
panel (F) using M3.5 x 13 mm screws (PP).
1b. Screw cam bolts (BB) all the way into the pre-drilled
small holes on top panel (A) as shown figure.
Hardware Used
BB
Cam bolt
OO
Door stopper
PP
M3.5 x 13 mm Screw
2a. Screw cam bolts (BB) all the way into the small holes
located on side panel left (C) and side panel right (D)
as shown figure.
2b. Insert the wood dowels (CC) into the end holes as a
guide, attach stretcher (B) to the side panel left (C)
and side panel right (D) by engaging cam locks (AA).
Hardware Used
AA
Cam lock
BB
Cam bolt
CC
Wood dowel
3a. Insert the wood dowels (CC) into the holes pre-drilled
on top edge of assembled frame.
3b. Position the top panel (A) onto the inserted dowels
and attach in place by engaging cam locks (AA) as
shown figure.
Hardware Used
AA
Cam lock
CC
Wood dowel
1
BB
A
x 6
PP
x 2
F
x 4
2
AA
B
x 2
C
x 2
D
x 2
3
CC
A
x 6
x 6
D
B
7
ASSEMBLY INSTRUCTIONS
4a. Insert the wood dowels (CC) into the holes pre-drilled
on bottom edge of assembled frame.
4b. Position the bottom panel (F) onto the inserted
dowels and attach in place by engaging M4 x 50 mm
screws (DD) as shown figure.
Hardware Used
CC
Wood dowel
M4 x 50 mm
DD
Screw
OO
5a. Expand the back panel (G) and lay it onto the back
edges of assembled frame making sure the margins
CC
along all edges are equal.
5b. There are pilot holes on the side panel, please align
with back panel pre-drilled holes when assemble with
M3.5 x 15 mm screws (FF).
BB
Hardware Used
FF
M3.5 x 15 mm Screw
6a. Attach a handle (KK) to the front side of door (H)
AA
using the 5/32 in. x 25 mm bolts (JJ) provided.
6b. Extend the door hinges (LL) and rest the hinge cups
onto the cutouts of door (H). Hinges in place by using
M4 x 15 mm screws (MM) in each. As shown in figure.
Hardware Used
JJ
5/32 in. x 25 mm Bolt
KK
Handle
C
LL
Door hinge
MM
M4 x 15 mm Screw
4
C
D
CC
x 4
x 4
5
G
x 20
6
MM
LL
JJ
x 4
H
x 2
x 4
KK
x 8
8
F
DD
FF
x 2