Publicidad
Idiomas disponibles
Idiomas disponibles
*
By using the drain pipe of the laundry sink:
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 27
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 27
A
A
A
CAUTION
•
Connect the hose guide (A) within 6 in.
(15 cm)* of the end of the drain hose.
If the drain hose is extended beyond
the end of the hose guide, mold or
microorganisms could spread inside the
dryer.
•
The drain hose can be installed up to
35.4 in. (90 cm) high, but the draining
capability can be reduced at the
maximum height. Too much water remaining in
Dryer may cause malfunction.
Wall standpipe drain system
The drain hose can be placed into a wall
standpipe drain system. To keep the end of
the drain hose bent, use the supplied hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
1. Assemble the hose connector (A), and attach it to
the end of the accessory hose as shown.
CAUTION
To prevent water leaks, make sure to connect the
hose and the connector firmly.
2. Connect the hose adaptor directly to the drain
pipe of the laundry sink.
English 27
2023/8/11 19:14:44
2023/8/11 19:14:44
Publicidad
