Publicidad
Expansion Slots
The system board is equipped with 1 AGP/ADD slot and 6 PCI
slots.
The AGP slot only supports 1.5V AGP 4x (1066MB/sec. bandwidth)
add-in cards. AGP is an interface designed to suppor t high
performance 3D graphics cards for 3D graphics applications. It
handles large amounts of graphics data with the following features:
• Pipelined memory read and write operations that hide memory
access latency.
• Demultiplexing of address and data on the bus for nearly 100
percent efficiency.
The ADD slot is used for installing an ADD (AGP Digital Display)
card.
Onboard Graphics Features
• Graphics memory
-
-
• Graphics controller
-
-
-
-
-
-
• 2D graphics features
-
-
-
63900235 2.pmd
Important:
Most PCI cards today are in "Master" mode and can be
installed anywhere between PCI slot 1 and PCI slot 5. DO NOT
install "Master" mode PCI cards onto PCI slot 6 because this
slot only supports "Slave" mode.
Shares 512K/1MB/8MB of the system memory in DOS
mode
Uses Dynamic Video Memor y Technology (DVMT) in
Windows mode
Core frequency of 200MHz
350MHz integrated 24-bit RAMDAC
Analog display up to 2048x1536 @ 60Hz refresh
3D setup and render engine - Discrete, Triangles, Strips and
fans
Per pixel perspective corrected texture mapping
Software DVD at 30fps, full screen
Optimized 256-bit BLT engine
32-bit alpha blended cursor
Programmable 3-color transparent cursor
25
English
9/11/02, 10:18 AM
2
25
Publicidad
