Samsung VR50T95735W/AA Manual Del Usuario página 16

Notes and cautions
Installation
NOTE
• If the cleaning area is wooden floors, it is
best to install the Clean Station along the
grain of wooden floors.
• If the power switch is off, the Jet Bot will
not charge even if it is docked on the Clean
Station.
• Always keep the Clean Station on.
- If power is not supplied to the Clean
Station, the Jet Bot cannot find it and
cannot automatically recharge.
- If the Jet Bot is left detached from the
Clean Station, the battery will drain
naturally.
• Do not attach the Boundary Markers as
(-----) shape.
- The Jet Bot may not detect it and cross
the boundary.
Charging
NOTE
• If the battery overheats during charging, it
may take longer to charge.
• When auto charging is not working, do the
following:
- Turn the power switch (at the side the Jet
Bot) off and on again.
- Unplug the Clean Station's power plug and
then plug it back on.
- Unplug the Clean Station, and then check
whether there is any foreign matter on
the charging pins and clean charging pins
of the Jet Bot and the Clean Station with a
dry cloth or rag.
- Check for any obstacles such as reflective
objects, chairs, etc. near the Clean Station.
16 English
• If the Jet Bot is left detached from the Clean
Station, the battery will drain naturally.
- Try to keep the Jet Bot being charged on
the Clean Station. (However, turn off the
power switch and leave the Clean Station
unplugged when planning to leave the
house for long periods of time by going
on a business trip or vacation, etc.)
Using
NOTE
• The Jet Bot may get caught on thresholds
of entrance door or veranda, etc. during
cleaning.
- To restart operation, shut off the power
switch, move the Jet Bot to an area where
it can move easily, and then turn on the
power again.
• In a dark area, the Jet Bot may not
recognize an object.
- Before cleaning, remove obstacles on the
floor.
• The Jet Bot cannot completely clean areas
which it cannot enter, such as small space
between the corner, between the sofas or
walls, etc.
- Please use another cleaning tool to clean
them regularly.
• The Jet Bot cannot vacuum clumps of dirt,
so some may remain on the floor after
cleaning.
- Please use another cleaning tool to clean
them regularly.
• After turning the Jet Bot off, wait for a
while and then turn it on for a normal
rebooting.
• When the Clean Station smells, replace a
Dust Bag or clean filters.