Orbegozo FHR 2045 Manual De Instrucciones página 16

FHR 2040 – FHR 2045
Replace the plug into the wall socket and switch the heater on again.
-
If the safety device again switches off the heater:
Remove the mains plug from the wall socket.
-
Have the heater inspected by a Service Centre or by your dealer.
-
CLEANING
We recommend that you clean your heater at least twice a year to remove accumulated dust and dirt.
Remove the mains plug from the wall socket.
-
Wait for the heater to cool down sufficiently.
-
You may clean the outside of the heater with a damp cloth or brush. Do not use water or allow
-
water to come into the appliance. Do not use any abrasive and caustic cleaning agents!
Never touch the heater in water!
-
Clean the air inlet and outlet grilles regularly with a vacuum cleaner, using the brush attachment.
-
STORAGE
Keep the original box in which the heater was packed to store it during the warmer months when it is
not in use. Clean the heater according to the instructions. Pack the heater in the original box and store
it in a cool, dry place.
This product is only suitable for well insulated spaces or occasional use
Item Symbol
Heat output
Nominal heat P
nom
output
Minimum heat P
min
output
(indicative)
Maximum 1.2
continuous
heat output
Auxiliary electricity consumption
At nominal el
max
heat output
At minimum el
min
heat output
In standby el
SB
mode
Value Unit Item
Type of heat input, for electric storage local space
heaters only (select one)
2 KW manual heat charge control, with integrated
thermostat
1.0 KW manual heat charge control with room
and/or outdoor temperature feedback
2 KW electronic heat charge control with room
and/or outdoor temperature feedback
Auxiliary electricity consumption
KW Type of heat output/room temperature control (select
N/A
one)
KW single stage heat output and no room
N/A
temperature control
W Two or more manual stages, no room
N/A
temperature control
with mechanic thermostat room temperature
control
Unit
no
no
no
no
no
no
yes
16