Descargar Imprimir esta página

Ego Power+ HT2600 Manual De Funcionamiento página 25

Orilladora de arbustos inalámbrica de ion litio de 56 v

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE:
Do not operate your hedge trimmer with dull or damaged cutting blades. This
may cause overload and will give unsatisfactory cutting results.
LUBRICATING THE BLADE (Fig. 8)
For best operation and longer blade life,
lubricate the hedge trimmer blade with
light weight machine oil before and after
each use.
1. Remove the battery pack from the
hedge trimmer.
2. Lay the hedge trimmer on a flat
surface. Apply some lightweight
machine oil along the edge of the top
blade. If you will be using the hedge trimmer for an extended period, it is advisable to
stop, remove the battery, and oil the blade before starting the project.
WARNING:
TRANSPORTING AND STORING
 Always place the blade sheath on the blade before storing or transporting the
hedge trimmer. Use caution to avoid the sharp teeth of the blade.
 Clean the hedge trimmer thoroughly before storing.
 Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
 Keep away from corrosive agents such as garden chemicals and deicing salts.
WARNING:
slip, heavy-duty protective gloves. Do not place your hand or fingers between
blades or in any position where they could get pinched or cut. NEVER touch
blades or service the unit with battery pack installed.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC
Do not oil while the hedge trimmer is running.
Blades are sharp. When handling the blade assembly, wear non-
8
25

Publicidad

loading

Este manual también es adecuado para:

Ht2600-fcHt2601