Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
CAUSE
◾
Hedge trimmer
doesn't work.
◾
◾
◾
◾
◾
◾
Excessive
vibration or
noise.
◾
◾
◾
26
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC
The battery pack is not
attached to the hedge trimmer.
No electrical contact between
the hedge trimmer and
battery pack.
The battery pack is depleted.
The battery pack or the hedge
trimmer is too hot.
The front and rear triggers are
not depressed simultaneously.
The blade is jammed.
Dry or corroded blades.
Blades or blade support is bent.
Bent or damaged teeth.
Loose blade bolts.
SOLUTION
◾
Attach the battery pack to the hedge
trimmer.
◾
Remove the battery, check contacts
and reinstall the battery pack
◾
Charge the battery pack.
◾
Remove the battery pack from the
hedge trimmer and allow the battery
or the hedge trimmer to cool until their
temperature drops below 152°F (67°C).
◾
Press the lock-off button first and then
press the triggers in the front and rear
handle simultaneously.
◾
Remove the battery pack from the tool,
remove the obstruction carefully, then
reinsert the battery and restart the tool.
◾
Lubricate the blades, following the
instructions in the "LUBRICATING THE
BLADE" section in this manual.
◾
Replace with a new blade or support.
Contact EGO service center for blade or
blade replacement service.
◾
Replace with a new blade. Contact EGO
service center for blade replacement
service.
◾
Tighten the blade bolts. Use an adjustable
wrench and a 4mm hex wrench (not
included) to tighten the blade bolts
clockwise.
Publicidad
