ADE CK 1601 Instrucciones De Operación página 12

Cleaning
Cleaning
NOTE on material damage
− Do not immerse the clock in water or other liquids.
− Never use harsh or abrasive cleaning agents or the like to clean the
clock. If you do, the surface could be scratched.
− Dust the clock if necessary with a soft, dry cloth. The glass can also be cleaned with
commercially available glass cleaners.
Fault/Remedy
Fault
No function
Technical Data
Model:
Battery:
Rated current:
Distributor (no service address):
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.
Declaration of Conformity
This clock was manufactured in accordance with the harmonised European standards.
It conforms to the provisions of the EC directives cited below:
‚ EMC Directive 2004/108/EC regarding electromagnetic compatibility
‚ RoHS Directive 2011/65/EU in the currently valid versions.
This declaration loses its validity if modifications are made to the products without our
approval.
12
Possible Cause
‚ Is the battery empty or has it been inserted
incorrectly?
Analog wall clock CK 1601
1x LR06 (AA), 1,5 V
220 mA
Waagen-Schmitt GmbH
Hammer Steindamm 27-29
22089 Hamburg, Germany
Analog wall clock CK 1601