Husky CAT827 Manual De Instrucciones página 12

Operations & Parts Manual
Index Description
1 HVLP Gravity Feed Spray Gun
2 Socket wrench
3 Spanner
4-6 Filter
7-12 Picks
13-16 Cleaning Brush
17 1/4" Air Die Grinder
18-21 Sanding Sleeve (1")
22-25 Sanding Sleeve (3/4")
26-29 Sanding Sleeve (1/2")
30-33 Sanding Sleeve (3/8")
34 1/8" Collet
35-36 1/4" Shaft Sanding Drum, Spec 1"& 3/4"
37-38 1/8" Shaft Sanding Drum, Spec 1/2"& 3/4"
39-40 Die Grinder Spanner
41-45 1/4" Shaft Grinding Stone
46-50 1/8" Shaft Grinding Stone
51 6" D/A Sander
52-54 Rough Sanding Paper
55-57 Fine Sanding Paper
58 Sealant Tape
59 Mini Air Blow Gun
60 Oil Pot
61 Quick Coupler
62-64 Male Plug
65 Female Plug
66 Blow Mode Case
12
Qty. Performance Description
1 Surface painting applications
1 Tie-up & loosen the nut of Spray gun
1 Tie-up & loosen the bolt screw nut
3 Filter paint, see parts list #33
6 Clean spay gun
4 Clean spay gun, wash cap
1 Grinding, deburring and sanding operation
4 Wood surface sanding
4 Wood surface sanding
4 Wood surface sanding
4 Wood surface sanding
1 Changeable collet
2 Support sanding sleeve
2 Support sanding sleeve
2 Tie-up & loosen the grinder collet
5 Grinding in confined area
5 Grinding in confined area
1 Wood surface sanding applications
3 Install with sanding pad
3 Install with sanding pad
1 Entwine on the thread of inlet to avoid air leakage
1 Surface cleaning
1 Lubricating oil for air tools
1 Connect with plug & air hose
3 Connect with air tool & quickly coupler
1 Connect with air tool & quickly coupler
1 House of the air tool & spray gun kit
Model No. CAT827
66