Husky CAT827 Manual De Instrucciones página 2

Operations & Parts Manual
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS
WARNING-Some dust created by using power tools contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm
WARNING-When using the product, basic precautions should always be followed, including
the following:
General: To reduce the risks of electric shock, fire, and injury to persons. Read all the
instructions before using the tool.
Work area
1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the
risks of electric shock, fire and injury to persons.
2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or
fumes.
3. Keep bystanders, children, and visitors away while operating the product. Distractions are
able to result in the loss of control of the tool.
Personal safety
1. Stay alert. Watch what you are doing and use common sense when operating the product.
Do not use the product while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating the tool increases the risk of injury to persons.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases
the risk of injury to persons as a result of being caught in moving pats
3. Remove adjusting wrenches and keys before turning the tool on. A wrench or a key that is
left attached to a rotating part of the tool increase the risk of personal injury.
4. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
enables better control of the tool in unexpected situations
5. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the
applicable conditions.
6. Always wear eye protection.
7. Always wear hearing protection when using the tool. Prolonged exposure to high intensity
noise is able to cause hearing loss.
8. Disconnect the product from the air source before making any adjustments.
9. Avoid unintentional starting. Be sure the switch is off before connecting to the air supply.
Do not carry the tool with your finger on the switch or connect the tool to the air supply with the
switch on.
10. Accessories must be rated for at least the speed of the tool marked on the tool label.
Wheels and other accessories running over the rated speed can fly apart and result in a risk of
injury to persons.
2
IMPROTANT SAFETY INSTRUCTIONS
Model No. CAT827