Publicidad
Idiomas disponibles
Idiomas disponibles
SERVICE
• Have your power supply serviced by a qualified re-
pair person using only identical replacement parts.
This will ensure that the safety of the power supply is
maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY RULES
•This equipment has arcing or sparking parts
which should not be exposed to flammable
vapors. Locate equipment at least 18" (457 mm)
above the floor when used in a repair facility.
•Do not expose to rain.
•For indoor use or temporary outdoor use.
Exercise reasonable care when using in wet
conditions.
•Connect only to properly grounded outlets.
•Do not use if the cord or batteries are damaged
in any way.
•Use proper extension cord. Keep cords dry and
off the ground; use a GFCI protected circuit
while charging.
•Chemical Burn Hazard. Keep coin cell battery
away from children.
•Store indoors.
•Do not operate multiple power supplies in
parallel.
•Operating this power supply less than 3' (1 m)
from building or other obstruction can cause
overheating and damage to the power supply.
For proper cooling, allow at least 3' (1 m) of emp-
ty space above and around the power supply.
•Do not connect power supply output to a build-
ing's electrical system.
•The power supply ground terminal is connected
to the ground terminals of each receptacle.
Before using the ground terminal, consult a
qualified electrician, electrical inspector, or lo-
cal agency having jurisdiction for local codes
or ordinances that apply to the intended use of
the generator.
•The power supply is isolated from the frame and
from the AC receptacle ground pin.
•Electrical devices that require a grounded re-
ceptacle pin connection will not function if the
receptacle ground pin is not functional.
•Do not exceed the load rating of the power supply.
Be mindful of the individual and accumulative
electrical load for all attachments. Exceeding the
load capacity of the power supply could result in
overheating, fire, electrical shock, or injury.
•Do not overload the power supply's capacity.
Exceeding the power supply's wattage/amperage
capacity may damage the power supply and/or
electrical devices connected to it.
• Attachments may require more power con-
sumptions than this power supply is capable
of providing. Check the attachment's manual
to avoid damage to the attachment or risk of
personal injury.
• Always follow all safety rules recommended by
the manufacturer of attachments.
• Do not use this power supply to provide power
for emergency medical equipment or life support
devices.
• Never leave the power supply unattended while
in use.
• Know your power supply. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
product. Do not alter or modify the power supply from
the original design or function. Misuse and improper
handling can cause injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
INSTALLATION
GROUNDING
Improperly connecting the ground-
DANGER
ing wire can result in the risk of
electric shock. Check with a qualified electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the equipment. Never remove the
grounding prong from the plug. Do not use the
equipment if the cord or plug is damaged. If dam-
aged, have it repaired by a MILWAUKEE service
facility before use. If the plug will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Grounded Tools (Three-Prong Plugs)
Tools marked "Grounding Required" have a three
wire cord and three prong grounding plug. The plug
must be connected to a properly grounded outlet
(See Figure A). If the tool should electrically mal-
function or break down, grounding provides a low
resistance path to carry electricity away from the
user, reducing the risk of electric shock.
The grounding prong in the plug is connected through
the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must
be the only wire connected to the tool's grounding
system and must never be attached to an electrically
"live" terminal.
Your tool must be plugged into an appro-
priate outlet, properly installed and
grounded in accordance with all codes
and ordinances. The plug and outlet
should look like those in Figure A.
3
Fig. A
Publicidad
