Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
If the product does not operate or does not operate properly, first check
according to the following list. If the reason the product does not operate or
does not operate properly is not included in the following list, the product
may have failed. At this time, it is recommended to send the product to the
dealer for repair.
Problem
The machine plugged
in but NOT powering
ON.
The machine suddenly
shuts-off during
working.
The machine does not
work properly
The remote does not
work
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or
sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter inside of motor.
Page 10
Possible Cause
Plug improperly
inserted into power
outlet.
The temperature
exceeds the threshold
of the motor thermal
cut-off.
The power cable is not
plugged in or has poor
contact.
The switch on the
body is not turned on.
The battery needs
replacing.
The remote is being
used more than 16ft
away from the fan.
Solution
Check that the power
plug is fully and
properly inserted into
the power outlet, and
re-insert if needed.
Please send to
after-sales
maintenance.
Make sure the plug is
properly inserted into
the socket.
Turn on the switch on
the body.
Replace the battery.
Use the remote closer
to the fan and make
sure it is pointing
directly at the display
panel.
Publicidad
