Publicidad
Idiomas disponibles
Idiomas disponibles
USER SERVICING INSTRUCTIONS
a)Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
b)Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.(Fig.
c)Remove fuse carefully. Insert the tip of your tool into fuse slot(close with
the terminal), then pry the fuse gradually and slowly, but do not overex-
ert. If you feel resistance, you can try it at several times and pry the fuse
little by little. When one side of the fuse has been released, then you can
get the fuse out entirely.(Fig.
d)Risk of fire (fix spacing). Replace fuse only with 2.5 Amp, 125 Volt fuse.
(Fig.
)
3
e)Close fuse cover. Slide closed the fuse access cover on top of attachment
plug.(Fig.
)
4
f )Risk of fire (fix spacing). Do not replace attachment plug. Contains a
safety device
(fuse)that should not be removed. Discard product if the attachment
plug is damaged.
g)If the fan suddenly does not work during normal operation, please check
whether it is a problem with the fuse.
1
NOTE
When you replace the fuse, please do not operate suddenly or overexert, or
else the product may become damaged.
1
)
)
2
2
3
4
Page 11
Publicidad
