Hikmicro RAPTOR Serie Guia De Inicio Rapido página 8

No. Component
9 Power Key
10 Thermal Lens
11 Optical Lens
Laser Ranger
12
Finder
13 Infrared Light
14 Tripod Mount
Battery
15
Compartment
Diopter
16
Adjustment Ring
17 Type-C Interface
18 Attachment Point
2. Install Battery (Page 2 – B)
Steps
1. Rotate the battery compartment cover counterclockwise to loosen it.
2. Take out the detachable battery compartment, and install the
batteries as the positive and negative marks indicate.
3. Install the battery compartment back, and rotate the battery
compartment cover clockwise to lock it.
Notes:
 Take the battery away if the device is not used for a long time.
 Charge the batteries with the supplied battery charger for more than
4 hours before first use.
 The battery type is 18650 with the protection board, and the battery
size should be within 19 mm × 70 mm. The rated voltage and
capacity are 3.6 VDC/3200 mAh.
3. Mount Neck Strap (Page 3 – C)
Steps:
Function
Hold to power on/off.
For thermal imaging.
For optical imaging.
Measures the distance to the target
with laser.
Helps to view target clearly in dark
environment.
Mounts the tripod.
For holding the batteries.
Adjusts the dioptric setting.
To connect the device to power supply
or transmit data with a type-C cable.
Mounts neck or hand strap.
6