Although this e-scooter is IP65 rated
(see section 2.6), you should exercise
caution when riding in wet conditions
and dry the e-scooter after use. Do
not use the e-scooter in temperatures
below 0°C or above 40°C. This
can have a negative effect on the
performance and life of the battery
and the motor.
•
Always keep the e-scooter away
from humidity in excess of 90%.
•
Do not attempt to turn off the
e-scooter while you are riding.
•
Take extra caution when using the
e-scooter in the dark.
•
Avoid overcrowded areas.
•
Notify your presence when
approaching a pedestrian or
cyclist when you are not seen
or heard. This e-scooter is fitted
with a bell for this purpose.
WARNING
Caution, the brake may become hot in
use. Do not touch after use.
The e-scooter must only be repaired
with original spare parts from an
authorised supplier or shop and by
a licensed mechanic. The opening,
disassembly or modification of the
e-scooter with non-licensed or non-
original parts or by a non-licensed
person will lead to the warranty
becoming invalid.
As with any mechanical component,
a vehicle is subject to high stresses
and wear. The various materials and
components may react differently
22
•
Do not change the use of this
e-scooter from its intended use.
•
This vehicle is not intended for
acrobatic use.
•
Regularly check the tightness
of the various bolted elements,
in particular the wheel axles,
the folding system, the steering
system and the brake system.
•
Eliminate any sharp edges caused
by use.
•
The kickstand must be folded up
before stepping onto the scooter.
Never step on the mudguards.
Any other relevant information
may be added, at the
manufacturer's discretion.
to wear or fatigue. If the expected
service life for a component has been
exceeded, it may break suddenly,
therefore risking causing injuries to
the user.
Cracks, scratches and discolouration
in the areas subject to high stresses
indicate that the component has
exceeded its service life and should be
replaced.
Pure Advance Flex