Dometic WAECO CombiPower 2012 Instrucciones De Uso página 55

_CombiPower_BA_DE-IT.book Seite 55 Freitag, 21. Oktober 2011 8:10 20
CombiPower
6.3 Configuring functions
Activating functions
➤ Switch on the device (see chapter "Switching the device on and off" on
page 48).
➤ Press the
"
✓ You are now in setup mode.
➤ Use the "▼" or "▲" button to navigate to the "P.S. Mode Param" menu.
➤ Press the
"
➤ Use the "▼" or "▲" button to navigate to the "Power Sharing" parameter.
➤ Press the
"
➤ Use the "▼" or "▲" button to set the "SHAR. SUPP. GEN." value.
➤ Briefly press the
Deactivating the generator function
➤ Use the "▼" or "▲" button to set the "SHAR. SUPP." value.
➤ Briefly press the
Deactivating the support function
➤ Use the "▼" or "▲" button to set the "SHAR." value.
➤ Briefly press the
You can quit setup mode at any time.
➤ Press the
"
EN
Configuring the device with the remote control
" button on the remote control for longer than 2 seconds.
" button to select the menu.
" button to select the parameter.
" button to save the value.
"
" button to save the value.
"
" button to save the value.
"
" button on the remote control.
55