Publicidad
Idiomas disponibles
Idiomas disponibles
WATER INLET CONNECTION
Do not use previously employed hoses.
Installation should comply with local water authority and building regulations' requirements.
1. Connect the inlet hose to the machine.
2. Connect the inlet hose to a tap with
3/4" thread.
FUNCTIONS OF THE CONTROL PANEL
1. Start/pause
Press this button to start or pause a wash cycle. The door cannot be open when the machine pauses.
You can press this button for 3 seconds to pause wash cycle and add clothes, but if the water level
or the temperature of the drum is high, the door will not open.
2. Dry
Press this button repeatedly to set the drying time. If the laundries want to be dry after being washed,
press this button. The detail are in the table on page 54.
3. Temp
Press this button repeatedly to change the wash temperature. The detail is in the form on page 54.
53
Publicidad
