Descargar Imprimir esta página

Parkside PASL 4000 B3 Instrucciones De Utilización Y De Seguridad página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Mounting the charging station
(see fig. C)
Note: You will need an electric drill.
CAUTION! RISK OF INJURY! Please read the
operating instructions for your drill.
CAUTION! Ensure that you do not damage any
electricity cables in the wall or ceiling.
Mark the two mounting holes at a distance of
approx. 35.5 mm apart.
Now drill the holes on the wall (ø approx. 6 mm;
depth approx. 30 mm).
Insert the dowels
15
necessary use a hammer to make this easier.
Screw up the screws
Now hang the charging station to the screws
via the mounting holes
Use the included drill template intended for
marking the drill holes.
Maintenance and cleaning
The product requires no maintenance. The LEDs
cannot be replaced.
Switch off and disconnect the product from the
power supply before you clean it.
Never immerse the product in water or other
liquids.
Do not use corrosive cleaning agents.
Clean the product regularly with a dry, fluff-free
cloth. Use a slightly moist cloth to remove any
stubborn dirt.
Disposal
The packaging is made entirely of recyclable ma-
terials, which you may dispose of at local recycling
facilities.
18 GB/IE
into the drilled holes. If
on the dowels
.
14
15
.
13
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information on
collection points and their opening hours
can be obtained from your local authority.
FR
À DÉPOSER
À DÉPOSER
Cet appareil,
EN MAGASIN
EN DÉCHÈTERIE
ses accessoires
et cordons
OU
se recyclent
The product incl. accessories and packaging ma-
terials are recyclable and are subject to extended
producer responsibility. Dispose them separately,
following the illustrated Info-tri (sorting information),
for better waste treatment. The Triman logo is valid
in France only.
Faulty or used batteries/rechargeable batteries must
be recycled in accordance with Directive 2006/66/EC
and its amendments. Please return the batteries/
rechargeable batteries and/or the product to the
available collection points.
Environmental damage through
incorrect disposal of the batter-
ies/rechargeable batteries!
Batteries/rechargeable batteries may not be disposed
of with the usual domestic waste. They may contain
toxic heavy metals and are subject to hazardous
waste treatment rules and regulations. The chemical
symbols for heavy metals are as follows: Cd = cad-
mium, Hg = mercury, Pb = lead. That is why you

Publicidad

loading