Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Applicable grinding wheel
Applicable cut-off wheel
Applicable wire wheel brush
Spindle thread
Max. spindle length
No load speed (n
) / Rated speed (n)
0
Overall length (with BL4040)
Net weight
Rated voltage
* If you install optional wheel guard indicated as 4-1/2" or 5" on the tool, 115 mm (4-1/2") and 125 mm (5") wheels
can be used.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
3.1 - 4.7 kg (6.8 - 10.4 lbs)
D.C. 36 V - 40 V max
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
GAG14
150 mm (6") *
6.4 mm (1/4")
150 mm (6") *
3.0 mm (1/8")
125 mm (5") *
20 mm (13/16")
5/8"
23 mm (29/32")
9,000 /min
410 mm (16-1/8")
PDC01 / PDC1200
Publicidad
