Miniso MG35 Manual Del Usuario página 8

insert one end into the USB interface of the corresponding host;
②Press the HOME button to pair, unplug the data cable after
successful connection, at this time LED2+LED3 indicator light is on!
③has been successfully connected, you can directly press the
HOME button, LED2+LED3 slow flash, automatic back connection!
5.Note this computer Bluetooth mode
①Press and hold the R+HOME button for 2 seconds at the same
time, then the LED1+LED3 indicator will blink quickly;
②Turn on Bluetooth on the PC, select the device named " Xbox
Wireless Controller", the connection is successful, and the
LED1+LED3 indicator light is on;
③It is recommended to play games on Steam platform, pay attention
to the "Steam- Settings - controller - common controller Settings"
check the support options;
6.Wireless 2.4G mode (optional function, only applicable to MG35Z
model, need to adapt to our receiver)
①2.4G wireless receiver support: PC device/Tesla vehicle system
/Switch host dock/Smart TV/TV box /PS3 host;
②Insert the 2.4G wireless receiver into the USB interface of the
corresponding device above;
③Press L+HOME button on the controller for 2 seconds at the same
time, the controller enters wireless pairing mode, and the
LED1+LED2+LED3 indicator blinks quickly;
④After the wireless connection is successful, the LED1+LED2+LED3
indicator light is long on, you can start to operate the game;
⑤When connecting the NSwitch host base, make sure that the "wired
connection of Pro handle" is enabled in the system Settings of the
NSwitch host;