Levoit TempSense 42 DC Manual De Usuario página 6

EN
R E M OT E C O N T R O L
The remote control can be used to control any
of the tower fan's functions from a distance.
The remote must be within 5 m / 16 ft of the
tower fan to work.
Note:
•
Remove the plastic tab from the remote
control's battery compartment before using.
•
To replace the battery, see page 8.
Sound & Display Off Button
•
G E T T I N G S TA R T E D
WARNING: Do not
1. Remove all packaging.
2. Snap the two pieces of the base together.
[Figure 2.1]
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 2.2]
4. Secure the base to the tower fan with the
U S I N G YO U R TOW E R FA N
1. Plug in and tap
fan.
2. Tap to change fan speed from 1 (low)
to 12 (high).
3. Move the angle adjuster up and down to
adjust the direction of the wind.
[Figure 3.1]
4. Optionally, tap
fan mode, or tap
Sleep Mode on/off.
Fan Modes
Tap to cycle through fan modes: Normal,
Turbo, and Auto.
6
Press to turn selection sounds
and display on/off.
use the fan before finishing assembly.
to turn on the tower
to select a different
to turn Advanced
On/Off
Button
Timer
Button
Fan Mode
Button
Sound &
Display Off
Button
plastic nut. [Figure 2.3]
5. Place the tower fan on a flat, stable
surface such as the floor.
6. Insert the power adapter into the port at
the bottom of the tower fan. Plug in and
turn on. [Figure 2.4]
Normal Mode
Use Normal Mode to manually control the
tower fan's speed. Tap
speed from 1 (low) to 12 (high).
• This is the tower fan's default mode.
• will show on the display.
Turbo Mode
Use Turbo Mode with air conditioning to
quickly circulate air in your home.
1. Tap and select Turbo Mode.
will show on the display.
Oscillate
Button
Increase/
Decrease
Fan Speed
Buttons
Advanced
Sleep
Button
to change fan
and